All Product
- HOME All Product
All Product
Long Fibers PP Nonwoven Geotextile
Long Fibers PP nonwoven geotextile is spunbonded needle punched geotextile. It is an important high-performance geosynthetics. It is produced by Italy and Germany imported advanced equipment. Its performance is far higher than our national standard GB/T17639-2008....
PP Woven Geotextile
Our supplied PP woven geotextile is plastic woven film yarn geotextile, created on large industrial looms that interlace horizontal and vertical threads to form a tight criss-cross or mesh. The flat threads are made by pp resin extrusion, splitting, stretching processing ways. ...
PP Biaxial Geogrid
A geogrid is geosynthetic material used to reinforce soils and similar materials. The principal function of geogrids is for reinforcement. For 30 years biaxial geogrids have been utilized in pavement construction and soil stabilization projects throughout the worldwide. Geogrids are commonly used to reinforce retaining walls, as well as subbases or subsoils below roads or structures. Soils pull apart under tension. Compared to soil, biaxial integral geogrids are strong in tension....
HDPE Biaxial Geogrids
HDPE biaxial geogrid(hdpe biaxial geogrids) is made of polymer material of high density polyethylene. It is extruded into sheet and then punched into regular mesh pattern, then stretched into a grid in longitudinal and transverse directions. The high polymer of plastic geogrid is directionally arranged in the heating and stretching process of manufacturing, which strengthen the binding force between molecular chains so it increases the grid strength....
HDPE Uniaxial Geogrid
HDPE uniaxial geogrids typically have their tensile strength in the machine (roll) direction. They are mainly used to reinforce the soil mass in a steepened slope or segmental retaining wall. On occasion, they function as a wrapping to confine the aggregate in the wire forms of welded wire faced steepened slopes....
Plastic Welding Hand Extrusion Welder
Plastic Welding Hand Extrusion Welder can make plastics extrusion which is a high-volume manufacturing process in which raw plastic is melted and formed into a continuous profile. The material is gradually melted by the mechanical energy generated by turning screws and by heaters arranged along the barrel. The melten polymer is then forced into a die, which shapes the polymer into a shape that hardens during cooling. The suitable materials include PP, PE, PVDF, EVA and other thermoplastic materials, especially having good performance on pp and pe material....
Plastic Welding HDPE Rod
Plastic welding HDPE rods are solid round products made by extrusion of HDPE resin. Usually its color is black color. It is used as an accessory material of plastic welding extruder. So its main function is to help create welding seam for HDPE plastic products....
Geomembrane Installation Concrete Polylock
Geomembrane installation concrete polyLock is a rugged, durable HDPE profile that can be cast-in-place or inserted into wet concrete, leaving the welding surface exposed upon completion of concrete preparation. The embedment of anchor fingers provides a high-strength mechanical anchor to the concrete. When properly installed and utilized with a geomembrane, the polyLock provides an outstanding barrier to leakage. It is the most effective and economical cast-in-place mechanical anchor system for HDPE....